4g91 Carburetor Manual

16-09-2021 admin

Mitsubishi 4G9 engine
Overview
Manufacturer	Mitsubishi Motors
Production	1991-2007
Layout
Configuration	Straight-4
Displacement	1.5 L (1,496 cc) 1.6 L (1,597 cc) 1.8 L (1,834 cc) 2.0 L (1,999 cc)
Cylinder bore	78.4 mm (3.09 in) 81 mm (3.19 in) 81.5 mm (3.21 in)
Piston stroke	77.5 mm (3.05 in) 89 mm (3.5 in) 95.8 mm (3.77 in)
Block material	Cast iron
Head material	Aluminum
Valvetrain	SOHC, DOHC4 valves x cyl. with MIVEC (some versions)
Compression ratio	8.5:1, 9.5:1, 10.0:1, 10.5:1, 11.0:1, 12.0:1
Combustion
Turbocharger	TD04 (on 4G93T)
Fuel system	Direct injection
Fuel type	Gasoline
Cooling system	Water cooled
Output
Power output	94–215 PS (69–158 kW; 93–212 hp)
Torque output	126–284 N⋅m (93–209 lb⋅ft)

4g91 Carburetor Manual Pdf
4g91 Carburetor Manual Diagram
4g91 Carburetor Manual
4g91 Carburetor Manual Download

The Mitsubishi 4G9 engine is a series of straight-4automobile engines produced by Mitsubishi Motors. All are 16-valve, and use both single- and double- overhead camshaft heads. Some feature MIVECvariable valve timing, and it was the first modern gasoline direct injection engine upon its introduction in August 1996.

4g91 Carburetor Manual - high-powerimages pdf manual download Wiring For 4g91 Engine 4G91 The 4G91 uses a 784 mm bore and 775 mm stroke for a total displacement of 15 L (1,496 cubic centimetres) With a 95:1 compression ratio and DOHC, four-valve. Aku kereta wira 1.5 soch manual mod flyweel st klac 8″ kalau 8.5″ lg bagus ekstraktor 4-2-1 open air cleaner. Naik bukit tinggi karak 90-100km gear 4 je enjin lancar naik 4 org dewasa gear 3 leh 110 tapi sebat skit. Tapi syang itu plug sudah basah sama minyak 1 minggu 1 x mau suci itu plug. Skrg pakai enjin 4g91 doch carb boleh lah bajet. Understand the ignition cycle. The four 'strokes' in the 4-cycle engine refer to the process of intake, compression, power, and exhaust. The timing of the ignition refers to the point between the compression and the power strokes at which the spark plug fires, creating the combustion that results in your horsepower, forcing the piston down into the cylinder.

Hi skywalker, change to 4G91 as in the whole engine? That would be much more expensive as well rite? Hmm but thanks for the reply dude. Btw, carburetors dont have SOHC or DOHC issit? They're just for fuel injection systems? 4G91 is a 1.5 DOHC from mitsubishi. Its a 16v engine a lot of ppl saying this engine is quite good. I donno about the CARB version but injection one with auto gear. Fully converted to satria should be less than 3K.

4G91[edit]

The 4G91 uses a bore and stroke of 78.4 mm × 77.5 mm (3.09 in × 3.05 in) for a total displacement of 1.5 L (1,496 cc). With a 9.5:1 compression ratio and DOHC, four-valve-per-cylinder head and multi-point EFI, this engine produces 115 PS (85 kW; 113 hp) at 6,000 rpm and 135 N⋅m (100 lb⋅ft) at 5,000 rpm.^[1] The 4G91 was a short-lived model, mainly built between 1991 and 1995 and rarely seen in export markets. There was also a carbureted model, with 97 PS (71 kW; 96 hp) at 6,000 rpm and 126 N⋅m (93 lb⋅ft) at 3,500 rpm.^[1]

Applications

4G92[edit]

The 4G92 displaces 1.6 L (1,597 cc). First appeared in late 1991 Japanese spec Mirage RS and Super R in DOHC form, it is basically bored out to 81 mm (3.19 in) and tuned version of the 4G91 producing 120 PS (88 kW; 118 hp). Later was introduced fuel-efficient SOHC version. But 4G92 is best known of its high-performance MIVEC equipped DOHC version, which fully replaced 'ordinary' DOHC in 1993. Power output raised as high as 170 PS (125 kW; 168 hp), as found in the Mirage Cyborg-ZR and JDM ’92 Lancer MR, making it one of the most powerful 1.6-litre naturally aspirated engines. A modular displacement (MD) version of the 4G92 MIVEC was also produced – MD is Mitsubishi's cylinder deactivation system which helps improve fuel consumption.

4G92P SOHC 16 Valve

Total Displacement - 1.6 L (1,597 cc)
Bore - 81 mm (3.19 in)
Stroke - 77.5 mm (3.05 in)
Compression Ratio - 10.0:1
Maximum Output (1) - 83 kW (113 PS; 111 bhp) at 6,000 rpm, and 137 N⋅m (101 lb⋅ft) at 5,000 rpm
Maximum Output (2) - 69 kW (94 PS; 93 bhp) at 5,500 rpm, and 135 N⋅m (100 lb⋅ft) at 4,000 rpm
- (1): Early European and JDM versions with 20°/42° intake and 54°/2° exhaust valve timing
- (2): General export and later European versions with 14°/58° intake and 52°/16° exhaust valve timing

4G92 DOHC 16 Valve

Total Displacement - 1.6 L (1,597 cc)
Bore - 81 mm (3.19 in)
Stroke - 77.5 mm (3.05 in)
Compression Ratio - 11.0:1
Maximum Output - 108 kW (147 PS; 145 bhp) at 7,000 rpm
Maximum Torque - 149 N⋅m (110 lb⋅ft) at 4,500 rpm

4G92-MIVEC DOHC 16 Valve

Total Displacement - 1.6 L (1,597 cc)
Bore - 81 mm (3.19 in)
Stroke - 77.5 mm (3.05 in)
Compression Ratio - 11.0:1
Maximum Output - 125 kW (170 PS; 168 bhp) at 7,500 rpm
Maximum Torque - 167 N⋅m (123 lb⋅ft) at 7,000 rpm

Applications

4G93[edit]

The 4G93 is a 1.8 L (1,834 cc) engine available in both SOHC and DOHC versions. Turbocharged variants are also produced. In mid 1996 Mitsubishi released a gasoline direct injection (GDI) version of the 4G93. This GDI model saw a production of over a million units though it was a heavy polluter therefore only sold in the Japanese market. A partially cleaned up version (with less power) was later sold in Europe, and was among the first of the modern GDI engines. It brought good fuel economy and, if well serviced, long engine life.

4G93 SOHC 16 Valve MPI

Multi-Point Injection (MPI)
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 89 mm (3.5 in)
Compression Ratio - 9.5:1
Maximum Output - 86 kW (117 PS; 115 bhp)
Maximum Torque - 166 N⋅m (122 lb⋅ft)

4G93 SOHC 16 Valve Carburetor

Carburetor
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 91 mm (3.6 in)
Compression Ratio - 9.5:1
Maximum Output - 74 kW (101 PS; 99 bhp)
Maximum Torque - 154 N⋅m (114 lb⋅ft)

4G93 DOHC 16 Valve MPI

Multi-Point Injection (MPI)
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 89 mm (3.5 in)
Compression Ratio - 10.5:1
Maximum Output - 103 kW (140 PS; 138 bhp) @ 6,500 rpm
Maximum Torque - 167 N⋅m (123 lb⋅ft) @ 5500 rpm

4G93T DOHC 16 Valve Turbo

Multi-Point Injection (MPI) with TD04 turbocharger
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 89 mm (3.5 in)
Compression Ratio - 8.5:1 (Upgraded to 9.1:1 in 1994)
Maximum Output - 143 kW (194 PS; 192 bhp) @ 6,000 rpm (Upgraded to 151 kW (205 PS; 202 bhp) in 1994, and again to 158 kW (215 PS; 212 bhp) in 1995)
Maximum Torque - 270 N⋅m (199 lb⋅ft) @ 3,000 rpm (Upgraded to 275 N⋅m (203 lb⋅ft) in 1994, and again to 284 N⋅m (209 lb⋅ft) in 1995)

4G93 DOHC 16 Valve GDI

Gasoline Direct Injection (GDI)
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 89 mm (3.5 in)
Compression Ratio - 12.0:1
Maximum Output -
- Europe: 88 kW (120 PS; 118 bhp) @ 5,250 rpm / 90 kW (122 PS; 121 bhp) @ 5,500 rpm / 92 kW (125 PS; 123 bhp) @ 5,500 rpm
- Japan: 96 kW (131 PS; 129 bhp) @ 5,500 rpm / 96 kW (131 PS; 129 bhp) @ 6,000 rpm / 110 kW (150 PS; 148 bhp) @ 6,500 rpm
Maximum Torque -
- Europe: 174 N⋅m (128 lb⋅ft) @ 3,500 rpm / 174 N⋅m (128 lb⋅ft) @ 3,750 rpm
- Japan: 181 N⋅m (133 lb⋅ft) @ 3,500 rpm / 177 N⋅m (131 lb⋅ft) @ 3,750 rpm / 178 N⋅m (131 lb⋅ft) @ 5,000 rpm

4G93 DOHC 16 Valve GDI Turbo

Gasoline Direct Injection (GDI) with turbocharger
Total Displacement - 1.8 L (1,834 cc)
Bore - 81 mm (3.19 in)
Stroke - 89 mm (3.5 in)
Compression Ratio - 10.0:1
Maximum Output - 118 kW (160 PS; 158 bhp) @ 5,200 rpm / 121 kW (165 PS; 162 bhp) @ 5,500 rpm
Maximum Torque - 220 N⋅m (162 lb⋅ft) @ 3,500 rpm / 220 N⋅m (162 lb⋅ft) @ 3,500 rpm

Applications

Mitsubishi Colt GTI
Mitsubishi Galant 1996

4G94[edit]

The 4G94 is a 2.0 L (1,999 cc) version built in Japan, used in the Mitsubishi Lancer. It has a cast iron engine block with Multi-point fuel injection and an aluminum SOHC cylinder head with forged steel connecting rods and four valves per cylinder. The 4G94 Also comes in the GDI DOHC variant which can be found in the Mitsubishi Galant.

4G94 SOHC 16 Valve MPI